With the STM32F103, you can use most third-party tutorials as they build upon this microcontroller. As a development board, the DevCard® has also an edge over other development boards. Find a full list of the components and features here: 

• STM32F103 Microcontroller 

• Micro SD card slot

• 1x USB-C connector for USART 

• 1x USB-C connector for USB 2.0 Full-Speed (FS) device controller

• 22x GPIO pins

• 1x CAN transceiver with CAN high, CAN low and ground connectors

• 1x external connector for 3.3 V

• 1x external connector for 5 V

• 1x pin connector for debugger (SWCLK, SWDIO, ground, 3.3 V)

• 1x pin connector for USART (3.3 V, RX, TX, ground)

• 1x pin connector for I2C (SCL, SDA, ground, 3.3 V)

• 1x free button on the board

• 1x reset button

• 1x LED on the board

• Programmable via USB-C connector and JTAG